US Bridges

Engle Mill RD over Anderson Fork

Good

Greene County, Ohio · 1.22 MI N of Gre CO Line · Structure no. 2935473

Built
1982
43 years old, rebuilt 2016
Condition
Good
inspected July 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
156 ft
2 main spans
Daily traffic
98
2020 count
Owner
County
County Highway Agency

About this bridge

Engle Mill RD over Anderson Fork is a prestressed concrete box beam or girders - multiple carrying Engle Mill RD over Anderson Fork in Greene County, Ohio. It was built in 1982 and reconstructed in 2016, so it is 43 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 98 vehicles a day, roughly 10% of them trucks, projected to reach 450 by 2040. The structure is 156 ft (47.5 m) long and 28 ft wide. If it were closed, the detour would be 5 mi (8 km).

CarriesEngle Mill RD
CrossesAnderson Fork
Location1.22 MI N of Gre CO Line
RouteCounty Highway T0047
StateOhio
Coordinates39.58171, -83.92196
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation8: Equal to present desirable criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating71.4 US tons
Inventory rating46.4 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans2
Design loadHL 93
Structure length156 ft (47.5 m)
Longest span76 ft (23.2 m)
Deck width28 ft (8.5 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic98 (2020)
Projected traffic450 by 2040
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed5 mi (8 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Engle Mill RD over Anderson Fork built?

It was built in 1982, making it 43 years old in 2025. It was reconstructed in 2016.

What condition is Engle Mill RD over Anderson Fork in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2024.

How much traffic does Engle Mill RD over Anderson Fork carry?

About 98 vehicles per day (2020 count), of which roughly 10% are trucks.

How long is Engle Mill RD over Anderson Fork?

The structure is 156 ft (47.5 m) long with a longest span of 76 ft (23.2 m) and a deck 28 ft wide.

Who owns Engle Mill RD over Anderson Fork?

It is owned by the County Highway Agency.