US Bridges

Irvin Rd. over Pike Run Irvin Rd.

Good

Allen County, Ohio · 0.38 Mi. E. of Cable Rd. · Structure no. 0254002

Built
1996
29 years old
Condition
Good
inspected June 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
64 ft
1 main span
Daily traffic
265
2015 count
Owner
County
County Highway Agency

About this bridge

Irvin Rd. over Pike Run Irvin Rd. is a prestressed concrete box beam or girders - multiple carrying Irvin Rd. over Pike Run Irvin Rd. in Allen County, Ohio. It was built in 1996, so it is 29 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 265 vehicles a day, roughly 8% of them trucks, projected to reach 368 by 2035. The structure is 64 ft (19.6 m) long and 28 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

Location

Open in Google Maps
CarriesIrvin Rd.
CrossesPike Run Irvin Rd.
Location0.38 Mi. E. of Cable Rd.
RouteCounty Highway T0100
CountyAllen County
StateOhio
Coordinates40.80176, -84.14971
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating62.2 US tons
Inventory rating37.1 US tons

Structure

Structure typeBox Beam or Girders - Multiple
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20 + Mod
Structure length64 ft (19.6 m)
Longest span60 ft (18.3 m)
Deck width28 ft (8.5 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic265 (2015)
Projected traffic368 by 2035
Trucks8%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Irvin Rd. over Pike Run Irvin Rd. built?

It was built in 1996, making it 29 years old in 2025.

What condition is Irvin Rd. over Pike Run Irvin Rd. in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.

How much traffic does Irvin Rd. over Pike Run Irvin Rd. carry?

About 265 vehicles per day (2015 count), of which roughly 8% are trucks.

How long is Irvin Rd. over Pike Run Irvin Rd.?

The structure is 64 ft (19.6 m) long with a longest span of 60 ft (18.3 m) and a deck 28 ft wide.

Who owns Irvin Rd. over Pike Run Irvin Rd.?

It is owned by the County Highway Agency.