US Bridges

RTE 987F over Payne ST

Good

Westchester County, New York · 0.6MI N Int 287I & Sbsp · Structure no. 000000001070481

Built
2017
8 years old
Condition
Good
inspected May 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
92 ft
1 main span
Daily traffic
38,693
2021 count
Owner
State
State Highway Agency

About this bridge

RTE 987F over Payne ST is a steel stringer/multi-beam or girder carrying RTE 987F over Payne ST in Westchester County, New York. It was built in 2017, so it is 8 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 38,693 vehicles a day, roughly 1% of them trucks, projected to reach 54,583 by 2041. The structure is 92 ft (28 m) long and 56 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesRTE 987F
CrossesPayne ST
Location0.6MI N Int 287I & Sbsp
Coordinates41.06236, -73.8073
Functional classUrban Principal Arterial - Other Freeway or Expressway

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Last inspectionMay 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating82 US tons
Inventory rating49.1 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length92 ft (28 m)
Longest span90 ft (27.4 m)
Deck width56 ft (17.1 m)
Roadway width52 ft (15.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic38,693 (2021)
Projected traffic54,583 by 2041
Trucks1%
Lanes on structure3
Traffic directionOne-way traffic
CarriesHighway
CrossesHighway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$7.2 million (2024 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was RTE 987F over Payne ST built?

It was built in 2017, making it 8 years old in 2025.

What condition is RTE 987F over Payne ST in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in May 2024.

How much traffic does RTE 987F over Payne ST carry?

About 38,693 vehicles per day (2021 count), of which roughly 1% are trucks.

How long is RTE 987F over Payne ST?

The structure is 92 ft (28 m) long with a longest span of 90 ft (27.4 m) and a deck 56 ft wide.

Who owns RTE 987F over Payne ST?

It is owned by the State Highway Agency.