US Bridges

RTE 372 over Batten Kill

Good

Washington County, New York · 0.3MI SE of Rt 29 JCT · Structure no. 000000001046910

Built
2011
14 years old
Condition
Good
inspected October 2023
Type
Stringer/Multi-beam or Girder
Prestressed Concrete
Length
126 ft
1 main span
Daily traffic
3,266
2018 count
Owner
State
State Highway Agency

About this bridge

RTE 372 over Batten Kill is a prestressed concrete stringer/multi-beam or girder carrying RTE 372 over Batten Kill in Washington County, New York. It was built in 2011, so it is 14 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 3,266 vehicles a day, roughly 6% of them trucks, projected to reach 3,483 by 2041. The structure is 126 ft (38.4 m) long and 45 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

Location

Open in Google Maps
CarriesRTE 372
CrossesBatten Kill
Location0.3MI SE of Rt 29 JCT
RouteState Highway 372
CountyWashington County
StateNew York
Coordinates43.08733, -73.49523
Functional classRural Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionOctober 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment3: Basically intolerable, requiring high priority of corrective action
Operating rating110.1 US tons
Inventory rating78.3 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length126 ft (38.4 m)
Longest span121 ft (37 m)
Deck width45 ft (13.7 m)
Roadway width31 ft (9.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,266 (2018)
Projected traffic3,483 by 2041
Trucks6%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$3.3 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 372 over Batten Kill built?

It was built in 2011, making it 14 years old in 2025.

What condition is RTE 372 over Batten Kill in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in October 2023.

How much traffic does RTE 372 over Batten Kill carry?

About 3,266 vehicles per day (2018 count), of which roughly 6% are trucks.

How long is RTE 372 over Batten Kill?

The structure is 126 ft (38.4 m) long with a longest span of 121 ft (37 m) and a deck 45 ft wide.

Who owns RTE 372 over Batten Kill?

It is owned by the State Highway Agency.