US Bridges

RTE 22A over Poultney River

Fair

Washington County, New York · 3.75 MI NW of Poultney · Structure no. 000000001017330

Built
1970
55 years old
Condition
Fair
inspected April 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
123 ft
1 main span
Daily traffic
3,167
2019 count
Owner
State
State Highway Agency

About this bridge

RTE 22A over Poultney River is a steel stringer/multi-beam or girder carrying RTE 22A over Poultney River in Washington County, New York. It was built in 1970, so it is 55 years old, older than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 3,167 vehicles a day, roughly 9% of them trucks, projected to reach 3,303 by 2041. The structure is 123 ft (37.5 m) long and 51 ft wide. If it were closed, the detour would be 10.6 mi (17 km).

CarriesRTE 22A
CrossesPoultney River
Location3.75 MI NW of Poultney
RouteState Highway 22A
Coordinates43.56726, -73.26319
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionApril 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry9: Superior to present desirable criteria
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating110.1 US tons
Inventory rating69 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadH 20
Structure length123 ft (37.5 m)
Longest span119 ft (36.2 m)
Deck width51 ft (15.4 m)
Roadway width47 ft (14.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,167 (2019)
Projected traffic3,303 by 2041
Trucks9%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed10.6 mi (17 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$2.9 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 22A over Poultney River built?

It was built in 1970, making it 55 years old in 2025.

What condition is RTE 22A over Poultney River in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in April 2024.

How much traffic does RTE 22A over Poultney River carry?

About 3,167 vehicles per day (2019 count), of which roughly 9% are trucks.

How long is RTE 22A over Poultney River?

The structure is 123 ft (37.5 m) long with a longest span of 119 ft (36.2 m) and a deck 51 ft wide.

Who owns RTE 22A over Poultney River?

It is owned by the State Highway Agency.