US Bridges

RTE 13 over Virgil Creek

Fair

Tompkins County, New York · 0.4 MI W JCT Rts 13 & 38 · Structure no. 000000001010410

Built
1992
33 years old
Condition
Fair
inspected June 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
80 ft
1 main span
Daily traffic
10,135
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 13 over Virgil Creek is a prestressed concrete box beam or girders - multiple carrying RTE 13 over Virgil Creek in Tompkins County, New York. It was built in 1992, so it is 33 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 10,135 vehicles a day, roughly 17% of them trucks, projected to reach 10,479 by 2041. The structure is 80 ft (24.4 m) long and 46 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesRTE 13
CrossesVirgil Creek
Location0.4 MI W JCT Rts 13 & 38
RouteState Highway 13
Coordinates42.49029, -76.3061
Functional classRural Principal Arterial - Other

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating72 US tons
Inventory rating30 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length80 ft (24.4 m)
Longest span76 ft (23.1 m)
Deck width46 ft (14.1 m)
Roadway width34 ft (10.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic10,135 (2020)
Projected traffic10,479 by 2041
Trucks17%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$2.1 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 13 over Virgil Creek built?

It was built in 1992, making it 33 years old in 2025.

What condition is RTE 13 over Virgil Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2024.

How much traffic does RTE 13 over Virgil Creek carry?

About 10,135 vehicles per day (2020 count), of which roughly 17% are trucks.

How long is RTE 13 over Virgil Creek?

The structure is 80 ft (24.4 m) long with a longest span of 76 ft (23.1 m) and a deck 46 ft wide.

Who owns RTE 13 over Virgil Creek?

It is owned by the State Highway Agency.