Culverton Street over Revere Feeder Flow
GoodOneida County, New York · 0.5 MI N of Route 49 · Structure no. 000000002269110
- Built
- 1966
- 59 years old
- Condition
- Good
- inspected October 2024
- Type
- Culvert
- Steel
- Length
- 29 ft
- 2 main spans
- Daily traffic
- 3,128
- 2021 count
- Owner
- City
- City or Municipal Highway Agency
About this bridge
Culverton Street over Revere Feeder Flow is a steel culvert carrying Culverton Street over Revere Feeder Flow in Oneida County, New York. It was built in 1966, so it is 59 years old, older than the New York average of 53 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 3,128 vehicles a day, roughly 5% of them trucks, projected to reach 4,379 by 2041. The structure is 29 ft (8.8 m) long. If it were closed, the detour would be 1.9 mi (3 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Channel and channel protection | 6 Satisfactory | Structural elements show some minor deterioration. |
| Culvert | 7 Good | Some minor problems. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Culverton Street over Revere Feeder Flow built?
It was built in 1966, making it 59 years old in 2025.
What condition is Culverton Street over Revere Feeder Flow in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in October 2024.
How much traffic does Culverton Street over Revere Feeder Flow carry?
About 3,128 vehicles per day (2021 count), of which roughly 5% are trucks.
How long is Culverton Street over Revere Feeder Flow?
The structure is 29 ft (8.8 m) long with a longest span of 12 ft (3.6 m).
Who owns Culverton Street over Revere Feeder Flow?
It is owned by the City or Municipal Highway Agency.