US Bridges

RTE 104 over Culver Road

Fair

Monroe County, New York · 3.0MI E JCT104+GENESEE R · Structure no. 000000001052222

Built
1967
58 years old
Condition
Fair
inspected April 2023
Type
Stringer/Multi-beam or Girder
Steel
Length
119 ft
1 main span
Daily traffic
23,124
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 104 over Culver Road is a steel stringer/multi-beam or girder carrying RTE 104 over Culver Road in Monroe County, New York. It was built in 1967, so it is 58 years old, older than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 23,124 vehicles a day, roughly 3% of them trucks, projected to reach 24,120 by 2041. The structure is 119 ft (36.3 m) long and 45 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

Location

Open in Google Maps
CarriesRTE 104
CrossesCulver Road
Location3.0MI E JCT104+GENESEE R
RouteState Highway 104
CountyMonroe County
StateNew York
Coordinates43.19584, -77.56138
Functional classUrban Principal Arterial - Other Freeway or Expressway

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure8 Very GoodNo problems noted.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionApril 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation6: Equal to present minimum criteria
Deck geometry2: Basically intolerable, requiring high priority of replacement
Approach roadway alignment6: Equal to present minimum criteria
Operating rating63.1 US tons
Inventory rating38 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length119 ft (36.3 m)
Longest span115 ft (35 m)
Deck width45 ft (13.7 m)
Roadway width40 ft (12.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic23,124 (2020)
Projected traffic24,120 by 2041
Trucks3%
Lanes on structure3
Traffic directionOne-way traffic
CarriesHighway
CrossesHighway
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$2.6 million (2024 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was RTE 104 over Culver Road built?

It was built in 1967, making it 58 years old in 2025.

What condition is RTE 104 over Culver Road in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in April 2023.

How much traffic does RTE 104 over Culver Road carry?

About 23,124 vehicles per day (2020 count), of which roughly 3% are trucks.

How long is RTE 104 over Culver Road?

The structure is 119 ft (36.3 m) long with a longest span of 115 ft (35 m) and a deck 45 ft wide.

Who owns RTE 104 over Culver Road?

It is owned by the State Highway Agency.