US Bridges

RTE 286 over Old Mill Run

Fair

Monroe County, New York · 1.0 MI E JCT Rts 286 & 47 · Structure no. 000000001044521

Built
1965
60 years old
Condition
Fair
inspected November 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
75 ft
1 main span
Daily traffic
4,763
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 286 over Old Mill Run is a steel stringer/multi-beam or girder carrying RTE 286 over Old Mill Run in Monroe County, New York. It was built in 1965, so it is 60 years old, older than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 4,763 vehicles a day, roughly 2% of them trucks, projected to reach 5,785 by 2041. The structure is 75 ft (22.9 m) long and 38 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

Location

Open in Google Maps
CarriesRTE 286
CrossesOld Mill Run
Location1.0 MI E JCT Rts 286 & 47
RouteState Highway 286
CountyMonroe County
StateNew York
Coordinates43.15474, -77.52052
Functional classUrban Minor Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionNovember 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating70 US tons
Inventory rating38 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 25 or greater
Structure length75 ft (22.9 m)
Longest span68 ft (20.7 m)
Deck width38 ft (11.7 m)
Roadway width36 ft (10.9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic4,763 (2020)
Projected traffic5,785 by 2041
Trucks2%
Lanes on structure2
Traffic directionOne-way traffic
CarriesHighway
CrossesWaterway
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$2.2 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 286 over Old Mill Run built?

It was built in 1965, making it 60 years old in 2025.

What condition is RTE 286 over Old Mill Run in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in November 2024.

How much traffic does RTE 286 over Old Mill Run carry?

About 4,763 vehicles per day (2020 count), of which roughly 2% are trucks.

How long is RTE 286 over Old Mill Run?

The structure is 75 ft (22.9 m) long with a longest span of 68 ft (20.7 m) and a deck 38 ft wide.

Who owns RTE 286 over Old Mill Run?

It is owned by the State Highway Agency.