US Bridges

RTE 3 over Sandy Creek

Good

Jefferson County, New York · 2.0 MI S JCT RTE 3 & 193 · Structure no. 000000001000450

Built
2001
24 years old
Condition
Good
inspected November 2023
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
282 ft
2 main spans
Daily traffic
956
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 3 over Sandy Creek is a steel continuous stringer/multi-beam or girder carrying RTE 3 over Sandy Creek in Jefferson County, New York. It was built in 2001, so it is 24 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 956 vehicles a day, roughly 8% of them trucks, projected to reach 961 by 2041. The structure is 282 ft (86 m) long and 39 ft wide. If it were closed, the detour would be 2.5 mi (4 km).

CarriesRTE 3
CrossesSandy Creek
Location2.0 MI S JCT RTE 3 & 193
RouteState Highway 3
Coordinates43.74387, -76.18506
Functional classRural Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure7 GoodSome minor problems.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionNovember 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation7: Better than present minimum criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating82 US tons
Inventory rating49.1 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans2
Design loadHS 25 or greater
Structure length282 ft (86 m)
Longest span151 ft (46 m)
Deck width39 ft (11.8 m)
Roadway width35 ft (10.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic956 (2020)
Projected traffic961 by 2041
Trucks8%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed2.5 mi (4 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$3.9 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 3 over Sandy Creek built?

It was built in 2001, making it 24 years old in 2025.

What condition is RTE 3 over Sandy Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in November 2023.

How much traffic does RTE 3 over Sandy Creek carry?

About 956 vehicles per day (2020 count), of which roughly 8% are trucks.

How long is RTE 3 over Sandy Creek?

The structure is 282 ft (86 m) long with a longest span of 151 ft (46 m) and a deck 39 ft wide.

Who owns RTE 3 over Sandy Creek?

It is owned by the State Highway Agency.