US Bridges

RTE 168 over Fulmer Creek

Good

Herkimer County, New York · 1.9 MI SE JCT SH28 &SH168 · Structure no. 000000001038980

Built
1987
38 years old
Condition
Good
inspected April 2023
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
72 ft
1 main span
Daily traffic
1,249
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 168 over Fulmer Creek is a prestressed concrete box beam or girders - multiple carrying RTE 168 over Fulmer Creek in Herkimer County, New York. It was built in 1987, so it is 38 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 1,249 vehicles a day, roughly 5% of them trucks, projected to reach 1,275 by 2041. The structure is 72 ft (21.9 m) long and 33 ft wide. If it were closed, the detour would be 13.7 mi (22 km).

Location

Open in Google Maps
CarriesRTE 168
CrossesFulmer Creek
Location1.9 MI SE JCT SH28 &SH168
RouteState Highway 168
CountyHerkimer County
StateNew York
Coordinates42.98062, -74.98419
Functional classUrban Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionApril 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating80 US tons
Inventory rating44 US tons

Structure

Structure typeBox Beam or Girders - Multiple
MaterialPrestressed Concrete
DeckNot applicable
Main spans1
Design loadHS 20
Structure length72 ft (21.9 m)
Longest span70 ft (21.3 m)
Deck width33 ft (10 m)
Roadway width30 ft (9.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,249 (2020)
Projected traffic1,275 by 2041
Trucks5%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed13.7 mi (22 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$911,000 (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 168 over Fulmer Creek built?

It was built in 1987, making it 38 years old in 2025.

What condition is RTE 168 over Fulmer Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2023.

How much traffic does RTE 168 over Fulmer Creek carry?

About 1,249 vehicles per day (2020 count), of which roughly 5% are trucks.

How long is RTE 168 over Fulmer Creek?

The structure is 72 ft (21.9 m) long with a longest span of 70 ft (21.3 m) and a deck 33 ft wide.

Who owns RTE 168 over Fulmer Creek?

It is owned by the State Highway Agency.