US Bridges

Weaver Hollow RD over Platte Kill

Fair

Delaware County, New York · At Int With CR 6 · Structure no. 000000003353110

Built
1995
30 years old, rebuilt 2021
Condition
Fair
inspected June 2023
Type
Stringer/Multi-beam or Girder
Steel
Length
65 ft
1 main span
Daily traffic
95
2021 count
Owner
County
County Highway Agency

About this bridge

Weaver Hollow RD over Platte Kill is a steel stringer/multi-beam or girder carrying Weaver Hollow RD over Platte Kill in Delaware County, New York. It was built in 1995 and reconstructed in 2021, so it is 30 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 95 vehicles a day, roughly 14% of them trucks, projected to reach 133 by 2041. The structure is 65 ft (19.8 m) long and 29 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

Location

Open in Google Maps
CarriesWeaver Hollow RD
CrossesPlatte Kill
LocationAt Int With CR 6
CountyDelaware County
StateNew York
Coordinates42.16674, -74.68336
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck9 ExcellentNo problems noted.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure7 GoodSome minor problems.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJune 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating73 US tons
Inventory rating44 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckWood or timber
Main spans1
Design loadHS 25 or greater
Structure length65 ft (19.8 m)
Longest span64 ft (19.5 m)
Deck width29 ft (8.8 m)
Roadway width28 ft (8.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic95 (2021)
Projected traffic133 by 2041
Trucks14%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$861,000 (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Weaver Hollow RD over Platte Kill built?

It was built in 1995, making it 30 years old in 2025. It was reconstructed in 2021.

What condition is Weaver Hollow RD over Platte Kill in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2023.

How much traffic does Weaver Hollow RD over Platte Kill carry?

About 95 vehicles per day (2021 count), of which roughly 14% are trucks.

How long is Weaver Hollow RD over Platte Kill?

The structure is 65 ft (19.8 m) long with a longest span of 64 ft (19.5 m) and a deck 29 ft wide.

Who owns Weaver Hollow RD over Platte Kill?

It is owned by the County Highway Agency.