US Bridges

RTE 30 over Binne Kill

Fair

Delaware County, New York · .01 MI NW JCT Rts 30 & 28 · Structure no. 000000001053450

Built
1993
32 years old
Condition
Fair
inspected August 2023
Type
Culvert
Concrete
Length
22 ft
1 main span
Daily traffic
3,033
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 30 over Binne Kill is a concrete culvert carrying RTE 30 over Binne Kill in Delaware County, New York. It was built in 1993, so it is 32 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 3,033 vehicles a day, roughly 4% of them trucks, projected to reach 3,164 by 2041. The structure is 22 ft (6.7 m) long and 35 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

Location

Open in Google Maps
CarriesRTE 30
CrossesBinne Kill
Location.01 MI NW JCT Rts 30 & 28
RouteState Highway 30
CountyDelaware County
StateNew York
Coordinates42.14843, -74.64796
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Channel and channel protection7 GoodSome minor problems.
Culvert6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionAugust 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating67 US tons
Inventory rating40 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans1
Design loadHS 25 or greater
Structure length22 ft (6.7 m)
Longest span21 ft (6.4 m)
Deck width35 ft (10.7 m)
Roadway width22 ft (6.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,033 (2020)
Projected traffic3,164 by 2041
Trucks4%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$638,000 (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 30 over Binne Kill built?

It was built in 1993, making it 32 years old in 2025.

What condition is RTE 30 over Binne Kill in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in August 2023.

How much traffic does RTE 30 over Binne Kill carry?

About 3,033 vehicles per day (2020 count), of which roughly 4% are trucks.

How long is RTE 30 over Binne Kill?

The structure is 22 ft (6.7 m) long with a longest span of 21 ft (6.4 m) and a deck 35 ft wide.

Who owns RTE 30 over Binne Kill?

It is owned by the State Highway Agency.