US Bridges

RTE 10 over Marvin Hollow

Fair

Delaware County, New York · 1.1 MI SE JCT Rts 10 +206 · Structure no. 000000001007740

Built
1960
65 years old
Condition
Fair
inspected April 2023
Type
Culvert
Concrete
Length
21 ft
1 main span
Daily traffic
2,993
2020 count
Owner
State
State Highway Agency

About this bridge

RTE 10 over Marvin Hollow is a concrete culvert carrying RTE 10 over Marvin Hollow in Delaware County, New York. It was built in 1960, so it is 65 years old, older than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 2,993 vehicles a day, roughly 10% of them trucks, projected to reach 3,122 by 2041. The structure is 21 ft (6.4 m) long and 52 ft wide. If it were closed, the detour would be 19.9 mi (32 km).

Location

Open in Google Maps
CarriesRTE 10
CrossesMarvin Hollow
Location1.1 MI SE JCT Rts 10 +206
RouteState Highway 10
CountyDelaware County
StateNew York
Coordinates42.15851, -75.1135
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Culvert5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionApril 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry9: Superior to present desirable criteria
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating110.1 US tons
Inventory rating75 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans1
Design loadUnknown
Structure length21 ft (6.4 m)
Longest span20 ft (6 m)
Deck width52 ft (15.8 m)
Roadway width48 ft (14.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic2,993 (2020)
Projected traffic3,122 by 2041
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed19.9 mi (32 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$928,000 (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 10 over Marvin Hollow built?

It was built in 1960, making it 65 years old in 2025.

What condition is RTE 10 over Marvin Hollow in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in April 2023.

How much traffic does RTE 10 over Marvin Hollow carry?

About 2,993 vehicles per day (2020 count), of which roughly 10% are trucks.

How long is RTE 10 over Marvin Hollow?

The structure is 21 ft (6.4 m) long with a longest span of 20 ft (6 m) and a deck 52 ft wide.

Who owns RTE 10 over Marvin Hollow?

It is owned by the State Highway Agency.