US Bridges

RTE 10 over Cannonsville Resv

Fair

Delaware County, New York · JCTRTE10+CANNONSVILLE Res · Structure no. 000000001007670

Built
1962
63 years old, rebuilt 2000
Condition
Fair
inspected June 2024
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
1,209 ft
7 main spans
Daily traffic
457
2021 count
Owner
Local
Other Local Agency

About this bridge

RTE 10 over Cannonsville Resv is a steel continuous stringer/multi-beam or girder carrying RTE 10 over Cannonsville Resv in Delaware County, New York. It was built in 1962 and reconstructed in 2000, so it is 63 years old, older than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 457 vehicles a day, roughly 26% of them trucks, projected to reach 476 by 2041. The structure is 1,209 ft (368.5 m) long and 31 ft wide. If it were closed, the detour would be 31.7 mi (51 km).

CarriesRTE 10
CrossesCannonsville Resv
LocationJCTRTE10+CANNONSVILLE Res
RouteState Highway 10
Coordinates42.08804, -75.31381
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating58 US tons
Inventory rating34 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans7
Design loadHS 25 or greater
Structure length1,209 ft (368.5 m)
Longest span225 ft (68.6 m)
Deck width31 ft (9.6 m)
Roadway width30 ft (9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic457 (2021)
Projected traffic476 by 2041
Trucks26%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed31.7 mi (51 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerOther Local Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$13.9 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 10 over Cannonsville Resv built?

It was built in 1962, making it 63 years old in 2025. It was reconstructed in 2000.

What condition is RTE 10 over Cannonsville Resv in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2024.

How much traffic does RTE 10 over Cannonsville Resv carry?

About 457 vehicles per day (2021 count), of which roughly 26% are trucks.

How long is RTE 10 over Cannonsville Resv?

The structure is 1,209 ft (368.5 m) long with a longest span of 225 ft (68.6 m) and a deck 31 ft wide.

Who owns RTE 10 over Cannonsville Resv?

It is owned by the Other Local Agency and maintained by the State Highway Agency.