US Bridges

Colby Hill Road over Bloods Brook

FairPosted for load

Sullivan County, New Hampshire · 175 Ft FR Bloodbrook RD · Structure no. 021301570012100

Built
1880
145 years old, rebuilt 1963
Condition
Fair
inspected July 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
82 ft
2 main spans
Daily traffic
137
2023 count
Owner
City
City or Municipal Highway Agency

About this bridge

Colby Hill Road over Bloods Brook is a steel stringer/multi-beam or girder carrying Colby Hill Road over Bloods Brook in Sullivan County, New Hampshire. It was built in 1880 and reconstructed in 1963, so it is 145 years old, older than the New Hampshire average of 56.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 137 vehicles a day, roughly 4% of them trucks, projected to reach 202 by 2043. The structure is 82 ft (25 m) long and 16 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesColby Hill Road
CrossesBloods Brook
Location175 Ft FR Bloodbrook RD
Coordinates43.55343, -72.2658
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour above top of footing
Structural evaluation2: Basically intolerable, requiring high priority of replacement
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating15.5 US tons
Inventory rating11.5 US tons

Structure

MaterialSteel
DeckWood or timber
Main spans2
Design loadUnknown
Structure length82 ft (25 m)
Longest span38 ft (11.6 m)
Deck width16 ft (4.9 m)
Roadway width13 ft (4 m)
Vertical clearance over deck9 ft (2.9 m)

Traffic and service

Average daily traffic137 (2023)
Projected traffic202 by 2043
Trucks4%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusListed on the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$314,000 (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Colby Hill Road over Bloods Brook built?

It was built in 1880, making it 145 years old in 2025. It was reconstructed in 1963.

What condition is Colby Hill Road over Bloods Brook in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in July 2024.

How much traffic does Colby Hill Road over Bloods Brook carry?

About 137 vehicles per day (2023 count), of which roughly 4% are trucks.

How long is Colby Hill Road over Bloods Brook?

The structure is 82 ft (25 m) long with a longest span of 38 ft (11.6 m) and a deck 16 ft wide.

Who owns Colby Hill Road over Bloods Brook?

It is owned by the City or Municipal Highway Agency.