US Bridges

State Highway 24 over Ft. Peck Spillway

Fair

McCone County, Montana · 4 Miles East of Fort Peck · Structure no. CEPMROMT0000011

Built
1937
88 years old
Condition
Fair
inspected August 2024
Type
Tee Beam
Concrete
Length
1,018 ft
20 main spans
Daily traffic
203
2019 count
Owner
Federal
Corps of Engineers (Civil)

About this bridge

State Highway 24 over Ft. Peck Spillway is a concrete tee beam carrying State Highway 24 over Ft. Peck Spillway in McCone County, Montana. It was built in 1937, so it is 88 years old, older than the Montana average of 47 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 203 vehicles a day, roughly 7% of them trucks, projected to reach 300 by 2040. The structure is 1,018 ft (310.2 m) long and 34 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

CarriesState Highway 24
CrossesFt. Peck Spillway
Location4 Miles East of Fort Peck
RouteState Highway 24
StateMontana
Coordinates48.02143, -106.35303
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating47.2 US tons
Inventory rating36.4 US tons

Structure

Structure typeTee Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans20
Design loadHS 20
Structure length1,018 ft (310.2 m)
Longest span51 ft (15.5 m)
Deck width34 ft (10.3 m)
Roadway width24 ft (7.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic203 (2019)
Projected traffic300 by 2040
Trucks7%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCorps of Engineers (Civil)
Maintained byCorps of Engineers (Civil)
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$4,000 (2024 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was State Highway 24 over Ft. Peck Spillway built?

It was built in 1937, making it 88 years old in 2025.

What condition is State Highway 24 over Ft. Peck Spillway in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in August 2024.

How much traffic does State Highway 24 over Ft. Peck Spillway carry?

About 203 vehicles per day (2019 count), of which roughly 7% are trucks.

How long is State Highway 24 over Ft. Peck Spillway?

The structure is 1,018 ft (310.2 m) long with a longest span of 51 ft (15.5 m) and a deck 34 ft wide.

Who owns State Highway 24 over Ft. Peck Spillway?

It is owned by the Corps of Engineers (Civil).