US Bridges

Sequoia RD over Br of Brushy Fork

Good

Miller County, Missouri · S 3 T 39 N R 13 W · Structure no. 34987

Built
2014
11 years old
Condition
Good
inspected January 2025
Type
Channel Beam
Concrete
Length
74 ft
2 main spans
Daily traffic
20
2023 count
Owner
County
County Highway Agency

About this bridge

Sequoia RD over Br of Brushy Fork is a concrete channel beam carrying Sequoia RD over Br of Brushy Fork in Miller County, Missouri. It was built in 2014, so it is 11 years old, younger than the Missouri average of 45.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 20 vehicles a day, roughly 10% of them trucks, projected to reach 34 by 2043. The structure is 74 ft (22.6 m) long and 20 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

Location

Open in Google Maps
CarriesSequoia RD
CrossesBr of Brushy Fork
LocationS 3 T 39 N R 13 W
RouteCounty Highway 206
CountyMiller County
StateMissouri
Coordinates38.16231, -92.33692
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionJanuary 2025
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment5: Somewhat better than minimum adequacy to tolerate being left in place as is
Operating rating59.5 US tons
Inventory rating35.7 US tons

Structure

Structure typeChannel Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans2
Design loadHS 20
Structure length74 ft (22.6 m)
Longest span36 ft (11 m)
Deck width20 ft (6.1 m)
Roadway width20 ft (6.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic20 (2023)
Projected traffic34 by 2043
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Sequoia RD over Br of Brushy Fork built?

It was built in 2014, making it 11 years old in 2025.

What condition is Sequoia RD over Br of Brushy Fork in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2025.

How much traffic does Sequoia RD over Br of Brushy Fork carry?

About 20 vehicles per day (2023 count), of which roughly 10% are trucks.

How long is Sequoia RD over Br of Brushy Fork?

The structure is 74 ft (22.6 m) long with a longest span of 36 ft (11 m) and a deck 20 ft wide.

Who owns Sequoia RD over Br of Brushy Fork?

It is owned by the County Highway Agency.