US Bridges

Inca RD over Branch Bear Br

Good

Linn County, Missouri · S 7 T 59 N R 19 W · Structure no. 35012

Built
2014
11 years old
Condition
Good
inspected November 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
40 ft
1 main span
Daily traffic
20
2024 count
Owner
County
County Highway Agency

About this bridge

Inca RD over Branch Bear Br is a steel stringer/multi-beam or girder carrying Inca RD over Branch Bear Br in Linn County, Missouri. It was built in 2014, so it is 11 years old, younger than the Missouri average of 45.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 20 vehicles a day, roughly 10% of them trucks, projected to reach 22 by 2044. The structure is 40 ft (12.3 m) long and 20 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesInca RD
CrossesBranch Bear Br
LocationS 7 T 59 N R 19 W
RouteCounty Highway 187
Coordinates39.94311, -93.06844
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure9 ExcellentNo problems noted.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionNovember 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation9: Superior to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating81.4 US tons
Inventory rating49.6 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length40 ft (12.3 m)
Longest span39 ft (12 m)
Deck width20 ft (6.2 m)
Roadway width20 ft (6.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic20 (2024)
Projected traffic22 by 2044
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Inca RD over Branch Bear Br built?

It was built in 2014, making it 11 years old in 2025.

What condition is Inca RD over Branch Bear Br in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in November 2024.

How much traffic does Inca RD over Branch Bear Br carry?

About 20 vehicles per day (2024 count), of which roughly 10% are trucks.

How long is Inca RD over Branch Bear Br?

The structure is 40 ft (12.3 m) long with a longest span of 39 ft (12 m) and a deck 20 ft wide.

Who owns Inca RD over Branch Bear Br?

It is owned by the County Highway Agency.