US Bridges

Rolling Hills RD over Branch of Goodwin

Good

Laclede County, Missouri · S 3 T 34 N R 16 W · Structure no. 30183

Built
1999
26 years old
Condition
Good
inspected March 2023
Type
Culvert
Concrete Continuous
Length
26 ft
2 main spans
Daily traffic
500
2023 count
Owner
City
City or Municipal Highway Agency

About this bridge

Rolling Hills RD over Branch of Goodwin is a concrete continuous culvert carrying Rolling Hills RD over Branch of Goodwin in Laclede County, Missouri. It was built in 1999, so it is 26 years old, younger than the Missouri average of 45.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 500 vehicles a day, roughly 10% of them trucks, projected to reach 725 by 2043. The structure is 26 ft (8 m) long and 42 ft wide. If it were closed, the detour would be 2.5 mi (4 km).

CarriesRolling Hills RD
CrossesBranch of Goodwin
LocationS 3 T 34 N R 16 W
RouteCity Street 243
Coordinates37.69849, -92.68643
Functional classUrban Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Culvert7 GoodSome minor problems.
Last inspectionMarch 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry8: Equal to present desirable criteria
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating61.5 US tons
Inventory rating36.7 US tons

Structure

Structure typeCulvert
MaterialConcrete Continuous
DeckNot applicable
Main spans2
Design loadUnknown
Structure length26 ft (8 m)
Longest span12 ft (3.7 m)
Deck width42 ft (12.8 m)
Roadway width40 ft (12.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic500 (2023)
Projected traffic725 by 2043
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed2.5 mi (4 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Rolling Hills RD over Branch of Goodwin built?

It was built in 1999, making it 26 years old in 2025.

What condition is Rolling Hills RD over Branch of Goodwin in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in March 2023.

How much traffic does Rolling Hills RD over Branch of Goodwin carry?

About 500 vehicles per day (2023 count), of which roughly 10% are trucks.

How long is Rolling Hills RD over Branch of Goodwin?

The structure is 26 ft (8 m) long with a longest span of 12 ft (3.7 m) and a deck 42 ft wide.

Who owns Rolling Hills RD over Branch of Goodwin?

It is owned by the City or Municipal Highway Agency.