US Bridges

HWY Toner Blvd over I 95

Poor

Bristol County, Massachusetts · .1 MI N of Attleboro T.L. · Structure no. N160473VJDOTNBI

Built
1960
65 years old
Condition
Poor
inspected November 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
298 ft
4 main spans
Daily traffic
33,600
2023 count
Owner
State
State Highway Agency

About this bridge

HWY Toner Blvd over I 95 is a steel stringer/multi-beam or girder carrying HWY Toner Blvd over I 95 in Bristol County, Massachusetts. It was built in 1960, so it is 65 years old, older than the Massachusetts average of 63.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 33,600 vehicles a day, roughly 6% of them trucks, projected to reach 54,012 by 2032. The structure is 298 ft (90.8 m) long and 64 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

Location

Open in Google Maps
CarriesHWY Toner Blvd
CrossesI 95
Location.1 MI N of Attleboro T.L.
RouteCity Street 0
CountyBristol County
StateMassachusetts
Coordinates41.96925, -71.29577
Functional classUrban Minor Arterial

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck4 PoorAdvanced section loss, deterioration, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionNovember 2024
Inspection intervalevery 12 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment7: Better than present minimum criteria
Operating rating58 US tons
Inventory rating32 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans4
Design loadHS 20 + Mod
Structure length298 ft (90.8 m)
Longest span113 ft (34.4 m)
Deck width64 ft (19.6 m)
Roadway width52 ft (15.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic33,600 (2023)
Projected traffic54,012 by 2032
Trucks6%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesHighway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$17.4 million (2025 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was HWY Toner Blvd over I 95 built?

It was built in 1960, making it 65 years old in 2025.

What condition is HWY Toner Blvd over I 95 in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in November 2024.

How much traffic does HWY Toner Blvd over I 95 carry?

About 33,600 vehicles per day (2023 count), of which roughly 6% are trucks.

How long is HWY Toner Blvd over I 95?

The structure is 298 ft (90.8 m) long with a longest span of 113 ft (34.4 m) and a deck 64 ft wide.

Who owns HWY Toner Blvd over I 95?

It is owned by the State Highway Agency.