US Bridges

Eugene Burnett RD over Beaver Creek

PoorPosted for load

Wayne County, Kentucky · 800 W Jct. KY-167 · Structure no. 116C00074N

Built
1975
50 years old
Condition
Poor
inspected March 2024
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
41 ft
2 main spans
Daily traffic
30
2022 count
Owner
County
County Highway Agency

About this bridge

Eugene Burnett RD over Beaver Creek is a steel continuous stringer/multi-beam or girder carrying Eugene Burnett RD over Beaver Creek in Wayne County, Kentucky. It was built in 1975, so it is 50 years old, older than the Kentucky average of 46.6 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. Its operating status is: posted for load restriction.

It carries about 30 vehicles a day, projected to reach 37 by 2042. The structure is 41 ft (12.4 m) long and 11 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

CarriesEugene Burnett RD
CrossesBeaver Creek
Location800 W Jct. KY-167
RouteCounty Highway 1610
Coordinates36.71056, -84.8425
Functional classRural Local

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure4 PoorAdvanced section loss, deterioration, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionMarch 2024
Inspection intervalevery 12 months
Operating statusPosted for load restriction
ScourFoundations stable; scour above top of footing
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating32.7 US tons
Inventory rating19.6 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans2
Design loadUnknown
Structure length41 ft (12.4 m)
Longest span19 ft (5.8 m)
Deck width11 ft (3.3 m)
Roadway width10 ft (2.9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic30 (2022)
Projected traffic37 by 2042
Trucks—
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Eugene Burnett RD over Beaver Creek built?

It was built in 1975, making it 50 years old in 2025.

What condition is Eugene Burnett RD over Beaver Creek in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in March 2024.

How much traffic does Eugene Burnett RD over Beaver Creek carry?

About 30 vehicles per day (2022 count).

How long is Eugene Burnett RD over Beaver Creek?

The structure is 41 ft (12.4 m) long with a longest span of 19 ft (5.8 m) and a deck 11 ft wide.

Who owns Eugene Burnett RD over Beaver Creek?

It is owned by the County Highway Agency.