US Bridges

Clyde Banks RD over Beaver Creek

FairPosted for load

Menifee County, Kentucky · .25 MI S JCT Ky 1274 · Structure no. 083C00028N

Built
1994
31 years old
Condition
Fair
inspected May 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
30 ft
1 main span
Daily traffic
52
2012 count
Owner
County
County Highway Agency

About this bridge

Clyde Banks RD over Beaver Creek is a steel stringer/multi-beam or girder carrying Clyde Banks RD over Beaver Creek in Menifee County, Kentucky. It was built in 1994, so it is 31 years old, younger than the Kentucky average of 46.6 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 52 vehicles a day, projected to reach 52 by 2032. The structure is 30 ft (9.1 m) long and 16 ft wide. If it were closed, the detour would be 98.8 mi (159 km).

Location

Open in Google Maps
CarriesClyde Banks RD
CrossesBeaver Creek
Location.25 MI S JCT Ky 1274
RouteCounty Highway 1007
CountyMenifee County
StateKentucky
Coordinates37.97389, -83.58806
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection7 GoodSome minor problems.
Last inspectionMay 2024
Inspection intervalevery 12 months
Operating statusPosted for load restriction
ScourFoundations stable; action required to protect exposed foundations
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry6: Equal to present minimum criteria
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating29 US tons
Inventory rating17.4 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, precast panels
Main spans1
Design loadUnknown
Structure length30 ft (9.1 m)
Longest span28 ft (8.5 m)
Deck width16 ft (4.9 m)
Roadway width14 ft (4.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic52 (2012)
Projected traffic52 by 2032
Trucks0%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed98.8 mi (159 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Clyde Banks RD over Beaver Creek built?

It was built in 1994, making it 31 years old in 2025.

What condition is Clyde Banks RD over Beaver Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in May 2024.

How much traffic does Clyde Banks RD over Beaver Creek carry?

About 52 vehicles per day (2012 count).

How long is Clyde Banks RD over Beaver Creek?

The structure is 30 ft (9.1 m) long with a longest span of 28 ft (8.5 m) and a deck 16 ft wide.

Who owns Clyde Banks RD over Beaver Creek?

It is owned by the County Highway Agency.