US Bridges

Crowe Ridge RD over Upper Howard Creek

GoodPosted for load

Clark County, Kentucky · 1.1 MI W of JCT Ky 974 · Structure no. 025C00011N

Built
1955
70 years old
Condition
Good
inspected August 2023
Type
Tee Beam
Concrete
Length
100 ft
3 main spans
Daily traffic
124
2019 count
Owner
County
County Highway Agency

About this bridge

Crowe Ridge RD over Upper Howard Creek is a concrete tee beam carrying Crowe Ridge RD over Upper Howard Creek in Clark County, Kentucky. It was built in 1955, so it is 70 years old, older than the Kentucky average of 46.6 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. Its operating status is: posted for load restriction.

It carries about 124 vehicles a day, projected to reach 124 by 2039. The structure is 100 ft (30.5 m) long and 55 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

CarriesCrowe Ridge RD
CrossesUpper Howard Creek
Location1.1 MI W of JCT Ky 974
RouteCounty Highway 1104
Coordinates37.91861, -84.02722
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection4 PoorAdvanced section loss, deterioration, spalling or scour.
Last inspectionAugust 2023
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment5: Somewhat better than minimum adequacy to tolerate being left in place as is
Operating rating30.2 US tons
Inventory rating18.1 US tons

Structure

Structure typeTee Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans3
Design loadUnknown
Structure length100 ft (30.5 m)
Longest span30 ft (9.1 m)
Deck width55 ft (16.8 m)
Roadway width22 ft (6.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic124 (2019)
Projected traffic124 by 2039
Trucks0%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusPossibly eligible for the National Register; requires further investigation
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Crowe Ridge RD over Upper Howard Creek built?

It was built in 1955, making it 70 years old in 2025.

What condition is Crowe Ridge RD over Upper Howard Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2023.

How much traffic does Crowe Ridge RD over Upper Howard Creek carry?

About 124 vehicles per day (2019 count).

How long is Crowe Ridge RD over Upper Howard Creek?

The structure is 100 ft (30.5 m) long with a longest span of 30 ft (9.1 m) and a deck 55 ft wide.

Who owns Crowe Ridge RD over Upper Howard Creek?

It is owned by the County Highway Agency.