US Bridges

E. 80th Ave over Trib to Ninnescah

Good

Sumner County, Kansas · 1.7E 1.0S of Belle Plaine · Structure no. 000960829706620

Built
2005
20 years old
Condition
Good
inspected May 2024
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
31 ft
2 main spans
Daily traffic
10
2013 count
Owner
County
County Highway Agency

About this bridge

E. 80th Ave over Trib to Ninnescah is a steel continuous stringer/multi-beam or girder carrying E. 80th Ave over Trib to Ninnescah in Sumner County, Kansas. It was built in 2005, so it is 20 years old, younger than the Kansas average of 52.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 10 vehicles a day, roughly 1% of them trucks, projected to reach 18 by 2043. The structure is 31 ft (9.3 m) long and 24 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesE. 80th Ave
CrossesTrib to Ninnescah
Location1.7E 1.0S of Belle Plaine
RouteCounty Highway 0
StateKansas
Coordinates37.37802, -97.24613
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionMay 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating37.8 US tons
Inventory rating22.6 US tons

Structure

MaterialSteel Continuous
DeckCorrugated steel
Main spans2
Design loadUnknown
Structure length31 ft (9.3 m)
Longest span14 ft (4.4 m)
Deck width24 ft (7.4 m)
Roadway width24 ft (7.2 m)
Vertical clearance over deck100 ft (30.5 m)

Traffic and service

Average daily traffic10 (2013)
Projected traffic18 by 2043
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was E. 80th Ave over Trib to Ninnescah built?

It was built in 2005, making it 20 years old in 2025.

What condition is E. 80th Ave over Trib to Ninnescah in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in May 2024.

How much traffic does E. 80th Ave over Trib to Ninnescah carry?

About 10 vehicles per day (2013 count), of which roughly 1% are trucks.

How long is E. 80th Ave over Trib to Ninnescah?

The structure is 31 ft (9.3 m) long with a longest span of 14 ft (4.4 m) and a deck 24 ft wide.

Who owns E. 80th Ave over Trib to Ninnescah?

It is owned by the County Highway Agency.