US Bridges

236th ST West over Teter Branch

Good

Hamilton County, Indiana · 00.31 E Six Points RD · Structure no. 2900473

Built
2013
12 years old
Condition
Good
inspected August 2023
Type
Stringer/Multi-beam or Girder
Prestressed Concrete
Length
74 ft
1 main span
Daily traffic
3,200
2019 count
Owner
County
County Highway Agency

About this bridge

236th ST West over Teter Branch is a prestressed concrete stringer/multi-beam or girder carrying 236th ST West over Teter Branch in Hamilton County, Indiana. It was built in 2013, so it is 12 years old, younger than the Indiana average of 46.6 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 3,200 vehicles a day, roughly 4% of them trucks, projected to reach 5,200 by 2039. The structure is 74 ft (22.7 m) long and 40 ft wide. If it were closed, the detour would be 2.5 mi (4 km).

Location

Open in Google Maps
Carries236th ST West
CrossesTeter Branch
Location00.31 E Six Points RD
RouteCounty Highway 758
CountyHamilton County
StateIndiana
Coordinates40.13055, -86.16958
Functional classRural Major Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionAugust 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating50.4 US tons
Inventory rating38.9 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length74 ft (22.7 m)
Longest span70 ft (21.4 m)
Deck width40 ft (12.1 m)
Roadway width37 ft (11.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,200 (2019)
Projected traffic5,200 by 2039
Trucks4%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed2.5 mi (4 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was 236th ST West over Teter Branch built?

It was built in 2013, making it 12 years old in 2025.

What condition is 236th ST West over Teter Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2023.

How much traffic does 236th ST West over Teter Branch carry?

About 3,200 vehicles per day (2019 count), of which roughly 4% are trucks.

How long is 236th ST West over Teter Branch?

The structure is 74 ft (22.7 m) long with a longest span of 70 ft (21.4 m) and a deck 40 ft wide.

Who owns 236th ST West over Teter Branch?

It is owned by the County Highway Agency.