US Bridges

Alpine RD over Union Pacific RR

Fair

Winnebago County, Illinois · 0.4 MI S Harrison Av · Structure no. 101010100000000

Built
1963
62 years old, rebuilt 2001
Condition
Fair
inspected May 2023
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
149 ft
3 main spans
Daily traffic
21,200
2022 count
Owner
State
State Highway Agency

About this bridge

Alpine RD over Union Pacific RR is a steel continuous stringer/multi-beam or girder carrying Alpine RD over Union Pacific RR in Winnebago County, Illinois. It was built in 1963 and reconstructed in 2001, so it is 62 years old, older than the Illinois average of 45.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 21,200 vehicles a day, roughly 6% of them trucks, projected to reach 24,240 by 2046. The structure is 149 ft (45.3 m) long and 68 ft wide. If it were closed, the detour would be 5 mi (8 km).

CarriesAlpine RD
CrossesUnion Pacific RR
Location0.4 MI S Harrison Av
Coordinates42.23214, -89.02884
Functional classUrban Other Principal Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure7 GoodSome minor problems.
Last inspectionMay 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation6: Equal to present minimum criteria
Deck geometry7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating84.7 US tons
Inventory rating50.7 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20 + Mod
Structure length149 ft (45.3 m)
Longest span53 ft (16.2 m)
Deck width68 ft (20.7 m)
Roadway width65 ft (19.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic21,200 (2022)
Projected traffic24,240 by 2046
Trucks6%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway
CrossesRailroad
Detour if closed5 mi (8 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was Alpine RD over Union Pacific RR built?

It was built in 1963, making it 62 years old in 2025. It was reconstructed in 2001.

What condition is Alpine RD over Union Pacific RR in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in May 2023.

How much traffic does Alpine RD over Union Pacific RR carry?

About 21,200 vehicles per day (2022 count), of which roughly 6% are trucks.

How long is Alpine RD over Union Pacific RR?

The structure is 149 ft (45.3 m) long with a longest span of 53 ft (16.2 m) and a deck 68 ft wide.

Who owns Alpine RD over Union Pacific RR?

It is owned by the State Highway Agency.