US Bridges

Benedict ST over Senachwine Creek

Poor

Peoria County, Illinois · NW Qtr 17 Chillicoth · Structure no. 072400200000000

Built
1979
46 years old
Condition
Poor
inspected March 2023
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
184 ft
3 main spans
Daily traffic
275
2022 count
Owner
City
City or Municipal Highway Agency

About this bridge

Benedict ST over Senachwine Creek is a steel continuous stringer/multi-beam or girder carrying Benedict ST over Senachwine Creek in Peoria County, Illinois. It was built in 1979, so it is 46 years old, older than the Illinois average of 45.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 275 vehicles a day, roughly 11% of them trucks, projected to reach 379 by 2046. The structure is 184 ft (56.1 m) long and 33 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesBenedict ST
CrossesSenachwine Creek
LocationNW Qtr 17 Chillicoth
RouteCity Street 0
Coordinates40.94041, -89.50043
Functional classUrban Local

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure4 PoorAdvanced section loss, deterioration, spalling or scour.
Substructure8 Very GoodNo problems noted.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionMarch 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry6: Equal to present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating78.9 US tons
Inventory rating47.2 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length184 ft (56.1 m)
Longest span81 ft (24.7 m)
Deck width33 ft (10.2 m)
Roadway width31 ft (9.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic275 (2022)
Projected traffic379 by 2046
Trucks11%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Benedict ST over Senachwine Creek built?

It was built in 1979, making it 46 years old in 2025.

What condition is Benedict ST over Senachwine Creek in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in March 2023.

How much traffic does Benedict ST over Senachwine Creek carry?

About 275 vehicles per day (2022 count), of which roughly 11% are trucks.

How long is Benedict ST over Senachwine Creek?

The structure is 184 ft (56.1 m) long with a longest span of 81 ft (24.7 m) and a deck 33 ft wide.

Who owns Benedict ST over Senachwine Creek?

It is owned by the City or Municipal Highway Agency.