US Bridges

Daysville RD over BNSF RR

Good

Ogle County, Illinois · 2 Mi. Se. Oregon · Structure no. 071331800000000

Built
1997
28 years old
Condition
Good
inspected July 2021
Type
Stringer/Multi-beam or Girder
Steel
Length
50 ft
1 main span
Daily traffic
2,100
2022 count
Owner
County
County Highway Agency

About this bridge

Daysville RD over BNSF RR is a steel stringer/multi-beam or girder carrying Daysville RD over BNSF RR in Ogle County, Illinois. It was built in 1997, so it is 28 years old, younger than the Illinois average of 45.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 2,100 vehicles a day, roughly 8% of them trucks, projected to reach 3,484 by 2046. The structure is 50 ft (15.1 m) long and 32 ft wide. If it were closed, the detour would be 9.9 mi (16 km).

Location

Open in Google Maps
CarriesDaysville RD
CrossesBNSF RR
Location2 Mi. Se. Oregon
RouteCounty Highway 0
CountyOgle County
StateIllinois
Coordinates41.99911, -89.31772
Functional classRural Major Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Last inspectionJuly 2021
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation8: Equal to present desirable criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating78.3 US tons
Inventory rating46.7 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length50 ft (15.1 m)
Longest span45 ft (13.7 m)
Deck width32 ft (9.8 m)
Roadway width32 ft (9.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic2,100 (2022)
Projected traffic3,484 by 2046
Trucks8%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesRailroad
Detour if closed9.9 mi (16 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Daysville RD over BNSF RR built?

It was built in 1997, making it 28 years old in 2025.

What condition is Daysville RD over BNSF RR in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2021.

How much traffic does Daysville RD over BNSF RR carry?

About 2,100 vehicles per day (2022 count), of which roughly 8% are trucks.

How long is Daysville RD over BNSF RR?

The structure is 50 ft (15.1 m) long with a longest span of 45 ft (13.7 m) and a deck 32 ft wide.

Who owns Daysville RD over BNSF RR?

It is owned by the County Highway Agency.