US Bridges

Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl

Good

Bingham County, Idaho · 1.6 N. 1.0 W. Goshen · Structure no. 000000000022665

Built
1974
51 years old
Condition
Good
inspected April 2024
Type
Tee Beam
Prestressed Concrete
Length
26 ft
1 main span
Daily traffic
100
2023 count
Owner
County
County Highway Agency

About this bridge

Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl is a prestressed concrete tee beam carrying Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl in Bingham County, Idaho. It was built in 1974, so it is 51 years old, older than the Idaho average of 45.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 100 vehicles a day, roughly 10% of them trucks, projected to reach 150 by 2039. The structure is 26 ft (7.9 m) long and 30 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesButte Rd; N 1000 E
CrossesE.Br.Snake R.Valley Cnl
Location1.6 N. 1.0 W. Goshen
RouteCounty Highway 0
StateIdaho
Coordinates43.33569, -112.10019
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionApril 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating52 US tons
Inventory rating31 US tons

Structure

Structure typeTee Beam
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadH 20
Structure length26 ft (7.9 m)
Longest span25 ft (7.6 m)
Deck width30 ft (9.1 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic100 (2023)
Projected traffic150 by 2039
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl built?

It was built in 1974, making it 51 years old in 2025.

What condition is Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2024.

How much traffic does Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl carry?

About 100 vehicles per day (2023 count), of which roughly 10% are trucks.

How long is Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl?

The structure is 26 ft (7.9 m) long with a longest span of 25 ft (7.6 m) and a deck 30 ft wide.

Who owns Butte Rd; N 1000 E over E.Br.Snake R.Valley Cnl?

It is owned by the County Highway Agency.