US Bridges

Glen Mohr Dr. over Beaver Branch

Good

New Castle County, Delaware · E. of Townsend · Structure no. 1465 000

Built
2008
17 years old
Condition
Good
inspected July 2024
Type
Culvert
Aluminum, Wrought Iron, or Cast Iron
Length
30 ft
1 main span
Daily traffic
99
2023 count
Owner
State
State Highway Agency

About this bridge

Glen Mohr Dr. over Beaver Branch is a aluminum, wrought iron, or cast iron culvert carrying Glen Mohr Dr. over Beaver Branch in New Castle County, Delaware. It was built in 2008, so it is 17 years old, younger than the Delaware average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 99 vehicles a day, roughly 11% of them trucks, projected to reach 123 by 2042. The structure is 30 ft (9.1 m) long. If it were closed, the detour would be 123.7 mi (199 km).

Location

Open in Google Maps
CarriesGlen Mohr Dr.
CrossesBeaver Branch
LocationE. of Townsend
RouteCity Street 0
CountyNew Castle County
StateDelaware
Coordinates39.40638, -75.64432
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection7 GoodSome minor problems.
Culvert7 GoodSome minor problems.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating49.3 US tons
Inventory rating41.7 US tons

Structure

Structure typeCulvert
MaterialAluminum, Wrought Iron, or Cast Iron
DeckClosed grating
Main spans1
Design loadHS 20
Structure length30 ft (9.1 m)
Longest span30 ft (9.1 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic99 (2023)
Projected traffic123 by 2042
Trucks11%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Glen Mohr Dr. over Beaver Branch built?

It was built in 2008, making it 17 years old in 2025.

What condition is Glen Mohr Dr. over Beaver Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2024.

How much traffic does Glen Mohr Dr. over Beaver Branch carry?

About 99 vehicles per day (2023 count), of which roughly 11% are trucks.

How long is Glen Mohr Dr. over Beaver Branch?

The structure is 30 ft (9.1 m) long with a longest span of 30 ft (9.1 m).

Who owns Glen Mohr Dr. over Beaver Branch?

It is owned by the State Highway Agency.