US Bridges

Matson Hill Road over Roaring Brook

Good

Hartford County, Connecticut · 750-FT So. of Hopewell RD · Structure no. 04510

Built
1940
85 years old
Condition
Good
inspected March 2021
Type
Tee Beam
Concrete
Length
34 ft
1 main span
Daily traffic
1,433
2021 count
Owner
Town / Township
Town or Township Highway Agency

About this bridge

Matson Hill Road over Roaring Brook is a concrete tee beam carrying Matson Hill Road over Roaring Brook in Hartford County, Connecticut. It was built in 1940, so it is 85 years old, older than the Connecticut average of 56.7 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 1,433 vehicles a day, roughly 3% of them trucks, projected to reach 2,129 by 2041. The structure is 34 ft (10.4 m) long and 34 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesMatson Hill Road
CrossesRoaring Brook
Location750-FT So. of Hopewell RD
RouteCity Street 0
Coordinates41.66395, -72.58152
Functional classUrban Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionMarch 2021
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment5: Somewhat better than minimum adequacy to tolerate being left in place as is
Operating rating47 US tons
Inventory rating36 US tons

Structure

Structure typeTee Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans1
Design loadUnknown
Structure length34 ft (10.4 m)
Longest span30 ft (9.1 m)
Deck width34 ft (10.4 m)
Roadway width24 ft (7.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,433 (2021)
Projected traffic2,129 by 2041
Trucks3%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerTown or Township Highway Agency
Maintained byTown or Township Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Matson Hill Road over Roaring Brook built?

It was built in 1940, making it 85 years old in 2025.

What condition is Matson Hill Road over Roaring Brook in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in March 2021.

How much traffic does Matson Hill Road over Roaring Brook carry?

About 1,433 vehicles per day (2021 count), of which roughly 3% are trucks.

How long is Matson Hill Road over Roaring Brook?

The structure is 34 ft (10.4 m) long with a longest span of 30 ft (9.1 m) and a deck 34 ft wide.

Who owns Matson Hill Road over Roaring Brook?

It is owned by the Town or Township Highway Agency.