US Bridges

Brookside Drive over Mill River

FairPosted for load

Fairfield County, Connecticut · 0.4 MI S of Route 58 · Structure no. 03697

Built
1955
70 years old
Condition
Fair
inspected February 2023
Type
Slab
Concrete
Length
45 ft
1 main span
Daily traffic
8,800
2023 count
Owner
Town / Township
Town or Township Highway Agency

About this bridge

Brookside Drive over Mill River is a concrete slab carrying Brookside Drive over Mill River in Fairfield County, Connecticut. It was built in 1955, so it is 70 years old, older than the Connecticut average of 56.7 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 8,800 vehicles a day, roughly 3% of them trucks, projected to reach 13,076 by 2043. The structure is 45 ft (13.7 m) long and 42 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesBrookside Drive
CrossesMill River
Location0.4 MI S of Route 58
RouteCity Street 0
Coordinates41.18081, -73.2617
Functional classUrban Minor Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionFebruary 2023
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourScour critical; foundations unstable for calculated scour conditions
Structural evaluation3: Basically intolerable, requiring high priority of corrective action
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating11.5 US tons
Inventory rating8.9 US tons

Structure

Structure typeSlab
MaterialConcrete
DeckConcrete, cast-in-place
Main spans1
Design loadUnknown
Structure length45 ft (13.7 m)
Longest span42 ft (12.8 m)
Deck width42 ft (12.8 m)
Roadway width31 ft (9.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic8,800 (2023)
Projected traffic13,076 by 2043
Trucks3%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerTown or Township Highway Agency
Maintained byTown or Township Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Brookside Drive over Mill River built?

It was built in 1955, making it 70 years old in 2025.

What condition is Brookside Drive over Mill River in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in February 2023.

How much traffic does Brookside Drive over Mill River carry?

About 8,800 vehicles per day (2023 count), of which roughly 3% are trucks.

How long is Brookside Drive over Mill River?

The structure is 45 ft (13.7 m) long with a longest span of 42 ft (12.8 m) and a deck 42 ft wide.

Who owns Brookside Drive over Mill River?

It is owned by the Town or Township Highway Agency.