US Bridges

E210-E10 Connector over I-10 Conn Ramps Colton

Good

San Bernardino County, California · 08-SBD-210-R33.04-RDL · Structure no. 54 0929G

Built
1992
33 years old
Condition
Good
inspected January 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete Continuous
Length
2,594 ft
15 main spans
Daily traffic
22,000
2020 count
Owner
State
State Highway Agency

About this bridge

E210-E10 Connector over I-10 Conn Ramps Colton is a prestressed concrete continuous box beam or girders - multiple carrying E210-E10 Connector over I-10 Conn Ramps Colton in San Bernardino County, California. It was built in 1992, so it is 33 years old, younger than the California average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 22,000 vehicles a day, roughly 5% of them trucks, projected to reach 24,566 by 2042. The structure is 2,594 ft (790.7 m) long and 42 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

Location

Open in Google Maps
CarriesE210-E10 Connector
CrossesI-10 Conn Ramps Colton
Location08-SBD-210-R33.04-RDL
RouteState Highway 210
CountySan Bernardino County
StateCalifornia
Coordinates34.06754, -117.20146
Functional classUrban Principal Arterial - Other Freeway or Expressway

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Last inspectionJanuary 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation7: Better than present minimum criteria
Deck geometry9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating59.6 US tons
Inventory rating35.7 US tons

Structure

Structure typeBox Beam or Girders - Multiple
MaterialPrestressed Concrete Continuous
DeckConcrete, cast-in-place
Main spans15
Design loadHS 20 + Mod
Structure length2,594 ft (790.7 m)
Longest span200 ft (61 m)
Deck width42 ft (12.8 m)
Roadway width38 ft (11.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic22,000 (2020)
Projected traffic24,566 by 2042
Trucks5%
Lanes on structure2
Traffic directionOne-way traffic
CarriesHighway
CrossesHighway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was E210-E10 Connector over I-10 Conn Ramps Colton built?

It was built in 1992, making it 33 years old in 2025.

What condition is E210-E10 Connector over I-10 Conn Ramps Colton in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.

How much traffic does E210-E10 Connector over I-10 Conn Ramps Colton carry?

About 22,000 vehicles per day (2020 count), of which roughly 5% are trucks.

How long is E210-E10 Connector over I-10 Conn Ramps Colton?

The structure is 2,594 ft (790.7 m) long with a longest span of 200 ft (61 m) and a deck 42 ft wide.

Who owns E210-E10 Connector over I-10 Conn Ramps Colton?

It is owned by the State Highway Agency.