Temple City Blvd over Eaton Wash
PoorLos Angeles County, California · 1.0MI E/O Rosemead Blvd · Structure no. 53C1419
- Built
- 1956
- 69 years old
- Condition
- Poor
- inspected March 2023
- Type
- Stringer/Multi-beam or Girder
- Steel
- Length
- 58 ft
- 1 main span
- Daily traffic
- 13,481
- 2017 count
- Owner
- City
- City or Municipal Highway Agency
About this bridge
Temple City Blvd over Eaton Wash is a steel stringer/multi-beam or girder carrying Temple City Blvd over Eaton Wash in Los Angeles County, California. It was built in 1956, so it is 69 years old, older than the California average of 54.8 years.
The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.
It carries about 13,481 vehicles a day, roughly 4% of them trucks, projected to reach 15,503 by 2041. The structure is 58 ft (17.7 m) long and 63 ft wide. If it were closed, the detour would be 1.9 mi (3 km).
Location
Open in Google MapsCondition and inspection
The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 4 Poor | Advanced section loss, deterioration, spalling or scour. |
| Superstructure | 5 Fair | All primary structural elements are sound but may have minor section loss, cracking, spalling or scour. |
| Substructure | 5 Fair | All primary structural elements are sound but may have minor section loss, cracking, spalling or scour. |
| Channel and channel protection | 9 Excellent | No problems noted. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Temple City Blvd over Eaton Wash built?
It was built in 1956, making it 69 years old in 2025.
What condition is Temple City Blvd over Eaton Wash in?
The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in March 2023.
How much traffic does Temple City Blvd over Eaton Wash carry?
About 13,481 vehicles per day (2017 count), of which roughly 4% are trucks.
How long is Temple City Blvd over Eaton Wash?
The structure is 58 ft (17.7 m) long with a longest span of 55 ft (16.8 m) and a deck 63 ft wide.
Who owns Temple City Blvd over Eaton Wash?
It is owned by the City or Municipal Highway Agency.