US Bridges

Washington Blvd over Sepulveda Chan

Good

Los Angeles County, California · 0.5MI W/O I-405 Fwy · Structure no. 53C1399

Built
1949
76 years old
Condition
Good
inspected July 2023
Type
Culvert
Concrete
Length
35 ft
2 main spans
Daily traffic
23,963
2013 count
Owner
City
City or Municipal Highway Agency

About this bridge

Washington Blvd over Sepulveda Chan is a concrete culvert carrying Washington Blvd over Sepulveda Chan in Los Angeles County, California. It was built in 1949, so it is 76 years old, older than the California average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 23,963 vehicles a day, roughly 2% of them trucks, projected to reach 29,862 by 2043. The structure is 35 ft (10.7 m) long and 113 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesWashington Blvd
CrossesSepulveda Chan
Location0.5MI W/O I-405 Fwy
RouteCity Street 0L106
Coordinates33.99983, -118.41767
Functional classUrban Other Principal Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection8 Very GoodNo problems noted.
Culvert8 Very GoodNo problems noted.
Last inspectionJuly 2023
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating59.6 US tons
Inventory rating35.7 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans2
Design loadHS 20
Structure length35 ft (10.7 m)
Longest span16 ft (4.9 m)
Deck width113 ft (34.3 m)
Roadway width78 ft (23.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic23,963 (2013)
Projected traffic29,862 by 2043
Trucks2%
Lanes on structure5
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Washington Blvd over Sepulveda Chan built?

It was built in 1949, making it 76 years old in 2025.

What condition is Washington Blvd over Sepulveda Chan in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2023.

How much traffic does Washington Blvd over Sepulveda Chan carry?

About 23,963 vehicles per day (2013 count), of which roughly 2% are trucks.

How long is Washington Blvd over Sepulveda Chan?

The structure is 35 ft (10.7 m) long with a longest span of 16 ft (4.9 m) and a deck 113 ft wide.

Who owns Washington Blvd over Sepulveda Chan?

It is owned by the City or Municipal Highway Agency.