US Bridges

Valley Blvd over Rio Hondo

Fair

Los Angeles County, California · 300FT W/O Santa Anita Ave · Structure no. 53C0348

Built
1956
69 years old
Condition
Fair
inspected March 2023
Type
Stringer/Multi-beam or Girder
Steel
Length
243 ft
3 main spans
Daily traffic
21,186
2017 count
Owner
City
City or Municipal Highway Agency

About this bridge

Valley Blvd over Rio Hondo is a steel stringer/multi-beam or girder carrying Valley Blvd over Rio Hondo in Los Angeles County, California. It was built in 1956, so it is 69 years old, older than the California average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 21,186 vehicles a day, roughly 3% of them trucks, projected to reach 25,423 by 2041. The structure is 243 ft (74.1 m) long and 96 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesValley Blvd
CrossesRio Hondo
Location300FT W/O Santa Anita Ave
RouteCity Street 0L353
Coordinates34.07624, -118.04285
Functional classUrban Other Principal Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure7 GoodSome minor problems.
Channel and channel protection9 ExcellentNo problems noted.
Last inspectionMarch 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry9: Superior to present desirable criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating64.3 US tons
Inventory rating38.6 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length243 ft (74.1 m)
Longest span79 ft (24.1 m)
Deck width96 ft (29.4 m)
Roadway width80 ft (24.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic21,186 (2017)
Projected traffic25,423 by 2041
Trucks3%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Valley Blvd over Rio Hondo built?

It was built in 1956, making it 69 years old in 2025.

What condition is Valley Blvd over Rio Hondo in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in March 2023.

How much traffic does Valley Blvd over Rio Hondo carry?

About 21,186 vehicles per day (2017 count), of which roughly 3% are trucks.

How long is Valley Blvd over Rio Hondo?

The structure is 243 ft (74.1 m) long with a longest span of 79 ft (24.1 m) and a deck 96 ft wide.

Who owns Valley Blvd over Rio Hondo?

It is owned by the City or Municipal Highway Agency.