US Bridges

Wilshire Blvd over State Route 110 & Ramp

Good

Los Angeles County, California · 07-LA-110-22.67-LA · Structure no. 53 0748

Built
1952
73 years old
Condition
Good
inspected September 2024
Type
Box Beam or Girders - Multiple
Concrete Continuous
Length
190 ft
3 main spans
Daily traffic
23,000
2022 count
Owner
State
State Highway Agency

About this bridge

Wilshire Blvd over State Route 110 & Ramp is a concrete continuous box beam or girders - multiple carrying Wilshire Blvd over State Route 110 & Ramp in Los Angeles County, California. It was built in 1952, so it is 73 years old, older than the California average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 23,000 vehicles a day, roughly 1% of them trucks, projected to reach 25,760 by 2041. The structure is 190 ft (57.9 m) long and 92 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

CarriesWilshire Blvd
CrossesState Route 110 & Ramp
Location07-LA-110-22.67-LA
RouteCity Street 0
Coordinates34.05129, -118.26142
Functional classUrban Other Principal Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Last inspectionSeptember 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment4: Meets minimum tolerable limits to be left in place as is
Operating rating35.1 US tons
Inventory rating24.7 US tons

Structure

MaterialConcrete Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length190 ft (57.9 m)
Longest span66 ft (20.1 m)
Deck width92 ft (28 m)
Roadway width56 ft (17.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic23,000 (2022)
Projected traffic25,760 by 2041
Trucks1%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesHighway
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was Wilshire Blvd over State Route 110 & Ramp built?

It was built in 1952, making it 73 years old in 2025.

What condition is Wilshire Blvd over State Route 110 & Ramp in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in September 2024.

How much traffic does Wilshire Blvd over State Route 110 & Ramp carry?

About 23,000 vehicles per day (2022 count), of which roughly 1% are trucks.

How long is Wilshire Blvd over State Route 110 & Ramp?

The structure is 190 ft (57.9 m) long with a longest span of 66 ft (20.1 m) and a deck 92 ft wide.

Who owns Wilshire Blvd over State Route 110 & Ramp?

It is owned by the State Highway Agency.