US Bridges

I 40 & Beverly Ave over Wash

Good

Mohave County, Arizona · 1.68 MI W of US 66 · Structure no. 06902

Built
1981
44 years old, rebuilt 2002
Condition
Good
inspected November 2022
Type
Culvert
Concrete Continuous
Length
32 ft
3 main spans
Daily traffic
32,763
2021 count
Owner
State
State Highway Agency

About this bridge

I 40 & Beverly Ave over Wash is a concrete continuous culvert carrying I 40 & Beverly Ave over Wash in Mohave County, Arizona. It was built in 1981 and reconstructed in 2002, so it is 44 years old, younger than the Arizona average of 47.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 32,763 vehicles a day, roughly 23% of them trucks, projected to reach 32,773 by 2041. The structure is 32 ft (9.8 m) long. If it were closed, the detour would be 3.7 mi (6 km).

Location

Open in Google Maps
CarriesI 40 & Beverly Ave
CrossesWash
Location1.68 MI W of US 66
RouteInterstate 40
CountyMohave County
StateArizona
Coordinates35.21747, -114.03181
Functional classUrban Principal Arterial - Interstate

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection7 GoodSome minor problems.
Culvert7 GoodSome minor problems.
Last inspectionNovember 2022
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating99 US tons
Inventory rating99 US tons

Structure

Structure typeCulvert
MaterialConcrete Continuous
DeckNot applicable
Main spans3
Design loadHS 20
Structure length32 ft (9.8 m)
Longest span10 ft (3 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic32,763 (2021)
Projected traffic32,773 by 2041
Trucks23%
Lanes on structure8
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemYes
Strategic Highway NetworkInterstate STRAHNET route

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$4,000 (2022 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was I 40 & Beverly Ave over Wash built?

It was built in 1981, making it 44 years old in 2025. It was reconstructed in 2002.

What condition is I 40 & Beverly Ave over Wash in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in November 2022.

How much traffic does I 40 & Beverly Ave over Wash carry?

About 32,763 vehicles per day (2021 count), of which roughly 23% are trucks.

How long is I 40 & Beverly Ave over Wash?

The structure is 32 ft (9.8 m) long with a longest span of 10 ft (3 m).

Who owns I 40 & Beverly Ave over Wash?

It is owned by the State Highway Agency.