US Bridges

Batesville Pike over Branch of Kellogg Creek

Good

Pulaski County, Arkansas · 2.8 MI N of SH 107 · Structure no. 000000000022938

Built
2008
17 years old
Condition
Good
inspected November 2024
Type
Culvert
Concrete
Length
32 ft
3 main spans
Daily traffic
6,900
2018 count
Owner
County
County Highway Agency

About this bridge

Batesville Pike over Branch of Kellogg Creek is a concrete culvert carrying Batesville Pike over Branch of Kellogg Creek in Pulaski County, Arkansas. It was built in 2008, so it is 17 years old, younger than the Arkansas average of 45.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 6,900 vehicles a day, roughly 2% of them trucks, projected to reach 2,192 by 2007. The structure is 32 ft (9.8 m) long and 41 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

CarriesBatesville Pike
CrossesBranch of Kellogg Creek
Location2.8 MI N of SH 107
RouteCounty Highway 67
Coordinates34.88382, -92.23573
Functional classUrban Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Culvert8 Very GoodNo problems noted.
Last inspectionNovember 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating36 US tons
Inventory rating21.1 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans3
Design loadUnknown
Structure length32 ft (9.8 m)
Longest span9 ft (2.7 m)
Deck width41 ft (12.5 m)
Roadway width19 ft (5.9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic6,900 (2018)
Projected traffic2,192 by 2007
Trucks2%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Batesville Pike over Branch of Kellogg Creek built?

It was built in 2008, making it 17 years old in 2025.

What condition is Batesville Pike over Branch of Kellogg Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in November 2024.

How much traffic does Batesville Pike over Branch of Kellogg Creek carry?

About 6,900 vehicles per day (2018 count), of which roughly 2% are trucks.

How long is Batesville Pike over Branch of Kellogg Creek?

The structure is 32 ft (9.8 m) long with a longest span of 9 ft (2.7 m) and a deck 41 ft wide.

Who owns Batesville Pike over Branch of Kellogg Creek?

It is owned by the County Highway Agency.