US Bridges

Melbourne Rd. over E. Branch - Calico Creek

GoodPosted for load

Izard County, Arkansas · .04NE JCT SH.5&56 Row Brg · Structure no. 0000000000A2100

Built
1941
84 years old, rebuilt 2017
Condition
Good
inspected January 2024
Type
Stringer/Multi-beam or Girder
Wood or Timber
Length
49 ft
3 main spans
Daily traffic
18
2014 count
Owner
State
State Highway Agency

About this bridge

Melbourne Rd. over E. Branch - Calico Creek is a wood or timber stringer/multi-beam or girder carrying Melbourne Rd. over E. Branch - Calico Creek in Izard County, Arkansas. It was built in 1941 and reconstructed in 2017, so it is 84 years old, older than the Arkansas average of 45.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. Its operating status is: posted for load restriction.

It carries about 18 vehicles a day, roughly 1% of them trucks, projected to reach 30 by 2033. The structure is 49 ft (14.8 m) long and 12 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

CarriesMelbourne Rd.
CrossesE. Branch - Calico Creek
Location.04NE JCT SH.5&56 Row Brg
RouteCity Street 0
Coordinates36.11933, -92.1418
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure8 Very GoodNo problems noted.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJanuary 2024
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating22 US tons
Inventory rating16 US tons

Structure

MaterialWood or Timber
DeckSteel plate
Main spans3
Design loadUnknown
Structure length49 ft (14.8 m)
Longest span15 ft (4.6 m)
Deck width12 ft (3.7 m)
Roadway width12 ft (3.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic18 (2014)
Projected traffic30 by 2033
Trucks1%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$237,000
NavigationNo navigation control on waterway

Frequently asked questions

When was Melbourne Rd. over E. Branch - Calico Creek built?

It was built in 1941, making it 84 years old in 2025. It was reconstructed in 2017.

What condition is Melbourne Rd. over E. Branch - Calico Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.

How much traffic does Melbourne Rd. over E. Branch - Calico Creek carry?

About 18 vehicles per day (2014 count), of which roughly 1% are trucks.

How long is Melbourne Rd. over E. Branch - Calico Creek?

The structure is 49 ft (14.8 m) long with a longest span of 15 ft (4.6 m) and a deck 12 ft wide.

Who owns Melbourne Rd. over E. Branch - Calico Creek?

It is owned by the State Highway Agency.