US Bridges

10th Street over Holland Branch

Good

Russell County, Alabama · Phenix City · Structure no. 020805

Built
2016
9 years old
Condition
Good
inspected August 2024
Type
Stringer/Multi-beam or Girder
Prestressed Concrete
Length
135 ft
1 main span
Daily traffic
2,100
2024 count
Owner
City
City or Municipal Highway Agency

About this bridge

10th Street over Holland Branch is a prestressed concrete stringer/multi-beam or girder carrying 10th Street over Holland Branch in Russell County, Alabama. It was built in 2016, so it is 9 years old, younger than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 9 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 2,100 vehicles a day, roughly 3% of them trucks, projected to reach 2,250 by 2044. The structure is 135 ft (41.1 m) long and 28 ft wide.

Carries10th Street
CrossesHolland Branch
LocationPhenix City
RouteCity Street 0
StateAlabama
Coordinates32.46666, -85.01668
Functional classUrban Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck9 ExcellentNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure9 ExcellentNo problems noted.
Channel and channel protection7 GoodSome minor problems.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Approach roadway alignment6: Equal to present minimum criteria
Operating rating98 US tons
Inventory rating32.7 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length135 ft (41.1 m)
Longest span135 ft (41.1 m)
Deck width28 ft (8.5 m)
Roadway width26 ft (7.9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic2,100 (2024)
Projected traffic2,250 by 2044
Trucks3%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed—
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$1.1 million (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was 10th Street over Holland Branch built?

It was built in 2016, making it 9 years old in 2025.

What condition is 10th Street over Holland Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2024.

How much traffic does 10th Street over Holland Branch carry?

About 2,100 vehicles per day (2024 count), of which roughly 3% are trucks.

How long is 10th Street over Holland Branch?

The structure is 135 ft (41.1 m) long with a longest span of 135 ft (41.1 m) and a deck 28 ft wide.

Who owns 10th Street over Holland Branch?

It is owned by the City or Municipal Highway Agency.