Halls Mill RD over Bolton Branch
GoodMobile County, Alabama · 0.2 MI W Mc Vay DR · Structure no. 014689
- Built
- 1926
- 99 years old, rebuilt 1989
- Condition
- Good
- inspected January 2024
- Type
- Culvert
- Concrete
- Length
- 25 ft
- 2 main spans
- Daily traffic
- 9,248
- 2024 count
- Owner
- City
- City or Municipal Highway Agency
About this bridge
Halls Mill RD over Bolton Branch is a concrete culvert carrying Halls Mill RD over Bolton Branch in Mobile County, Alabama. It was built in 1926 and reconstructed in 1989, so it is 99 years old, older than the Alabama average of 51.1 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 9,248 vehicles a day, roughly 6% of them trucks, projected to reach 13,872 by 2044. The structure is 25 ft (7.6 m) long. If it were closed, the detour would be 1.2 mi (2 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Channel and channel protection | 7 Good | Some minor problems. |
| Culvert | 7 Good | Some minor problems. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Halls Mill RD over Bolton Branch built?
It was built in 1926, making it 99 years old in 2025. It was reconstructed in 1989.
What condition is Halls Mill RD over Bolton Branch in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.
How much traffic does Halls Mill RD over Bolton Branch carry?
About 9,248 vehicles per day (2024 count), of which roughly 6% are trucks.
How long is Halls Mill RD over Bolton Branch?
The structure is 25 ft (7.6 m) long with a longest span of 12 ft (3.7 m).
Who owns Halls Mill RD over Bolton Branch?
It is owned by the City or Municipal Highway Agency.