US Bridges

Ready Section RD over Brier Fork Creek

FairPosted for load

Madison County, Alabama · 1.0 MI E JCT CO RD 106 · Structure no. 008427

Built
1964
61 years old
Condition
Fair
inspected November 2024
Type
Tee Beam
Concrete
Length
170 ft
5 main spans
Daily traffic
990
2002 count
Owner
County
County Highway Agency

About this bridge

Ready Section RD over Brier Fork Creek is a concrete tee beam carrying Ready Section RD over Brier Fork Creek in Madison County, Alabama. It was built in 1964, so it is 61 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 990 vehicles a day, roughly 1% of them trucks, projected to reach 1,195 by 2040. The structure is 170 ft (51.8 m) long and 24 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesReady Section RD
CrossesBrier Fork Creek
Location1.0 MI E JCT CO RD 106
RouteCounty Highway 109
StateAlabama
Coordinates34.93291, -86.66037
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure7 GoodSome minor problems.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionNovember 2024
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating41.8 US tons
Inventory rating25 US tons

Structure

Structure typeTee Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans5
Design loadH 15
Structure length170 ft (51.8 m)
Longest span34 ft (10.4 m)
Deck width24 ft (7.3 m)
Roadway width22 ft (6.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic990 (2002)
Projected traffic1,195 by 2040
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost$1.1 million (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Ready Section RD over Brier Fork Creek built?

It was built in 1964, making it 61 years old in 2025.

What condition is Ready Section RD over Brier Fork Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in November 2024.

How much traffic does Ready Section RD over Brier Fork Creek carry?

About 990 vehicles per day (2002 count), of which roughly 1% are trucks.

How long is Ready Section RD over Brier Fork Creek?

The structure is 170 ft (51.8 m) long with a longest span of 34 ft (10.4 m) and a deck 24 ft wide.

Who owns Ready Section RD over Brier Fork Creek?

It is owned by the County Highway Agency.