US Bridges

Campbell Hill Rd. over Campbell Mill Ck.

Fair

Geneva County, Alabama · 4 Mi. NW of Chancellor · Structure no. 009942

Built
1969
56 years old, rebuilt 1992
Condition
Fair
inspected January 2025
Type
Stringer/Multi-beam or Girder
Steel
Length
31 ft
1 main span
Daily traffic
55
2025 count
Owner
County
County Highway Agency

About this bridge

Campbell Hill Rd. over Campbell Mill Ck. is a steel stringer/multi-beam or girder carrying Campbell Hill Rd. over Campbell Mill Ck. in Geneva County, Alabama. It was built in 1969 and reconstructed in 1992, so it is 56 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 55 vehicles a day, projected to reach 210 by 2045. The structure is 31 ft (9.4 m) long and 16 ft wide. If it were closed, the detour would be 8.1 mi (13 km).

Location

Open in Google Maps
CarriesCampbell Hill Rd.
CrossesCampbell Mill Ck.
Location4 Mi. NW of Chancellor
RouteCounty Highway 0
CountyGeneva County
StateAlabama
Coordinates31.17249, -85.84576
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionJanuary 2025
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry7: Better than present minimum criteria
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment5: Somewhat better than minimum adequacy to tolerate being left in place as is
Operating rating52.2 US tons
Inventory rating37.3 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckWood or timber
Main spans1
Design loadUnknown
Structure length31 ft (9.4 m)
Longest span30 ft (9.1 m)
Deck width16 ft (5 m)
Roadway width15 ft (4.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic55 (2025)
Projected traffic210 by 2045
Trucks0%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed8.1 mi (13 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$194,000 (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Campbell Hill Rd. over Campbell Mill Ck. built?

It was built in 1969, making it 56 years old in 2025. It was reconstructed in 1992.

What condition is Campbell Hill Rd. over Campbell Mill Ck. in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in January 2025.

How much traffic does Campbell Hill Rd. over Campbell Mill Ck. carry?

About 55 vehicles per day (2025 count).

How long is Campbell Hill Rd. over Campbell Mill Ck.?

The structure is 31 ft (9.4 m) long with a longest span of 30 ft (9.1 m) and a deck 16 ft wide.

Who owns Campbell Hill Rd. over Campbell Mill Ck.?

It is owned by the County Highway Agency.