US Bridges

CO RD 11 over Ramsey Mill Branch

PoorPosted for load

Franklin County, Alabama · .5 MI NW CO 15 CO 11 JCT · Structure no. 001204

Built
1935
90 years old
Condition
Poor
inspected January 2025
Type
Stringer/Multi-beam or Girder
Steel
Length
32 ft
1 main span
Daily traffic
170
2000 count
Owner
County
County Highway Agency

About this bridge

CO RD 11 over Ramsey Mill Branch is a steel stringer/multi-beam or girder carrying CO RD 11 over Ramsey Mill Branch in Franklin County, Alabama. It was built in 1935, so it is 90 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 3 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. Its operating status is: posted for load restriction.

It carries about 170 vehicles a day, roughly 2% of them trucks, projected to reach 337 by 2031. The structure is 32 ft (9.8 m) long and 23 ft wide. If it were closed, the detour would be 11.2 mi (18 km).

CarriesCO RD 11
CrossesRamsey Mill Branch
Location.5 MI NW CO 15 CO 11 JCT
RouteCounty Highway 11
StateAlabama
Coordinates34.55937, -88.11797
Functional classRural Minor Collector

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck3 SeriousLoss of section, deterioration, spalling or scour have seriously affected primary structural components.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionJanuary 2025
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation2: Basically intolerable, requiring high priority of replacement
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating3 US tons
Inventory rating2 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadUnknown
Structure length32 ft (9.8 m)
Longest span32 ft (9.8 m)
Deck width23 ft (7.1 m)
Roadway width20 ft (6.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic170 (2000)
Projected traffic337 by 2031
Trucks2%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed11.2 mi (18 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$285,000 (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was CO RD 11 over Ramsey Mill Branch built?

It was built in 1935, making it 90 years old in 2025.

What condition is CO RD 11 over Ramsey Mill Branch in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in January 2025.

How much traffic does CO RD 11 over Ramsey Mill Branch carry?

About 170 vehicles per day (2000 count), of which roughly 2% are trucks.

How long is CO RD 11 over Ramsey Mill Branch?

The structure is 32 ft (9.8 m) long with a longest span of 32 ft (9.8 m) and a deck 23 ft wide.

Who owns CO RD 11 over Ramsey Mill Branch?

It is owned by the County Highway Agency.