Mingo RD over Mill Branch
FairColbert County, Alabama · Mill Branch on Mingo RD · Structure no. 020137
- Built
- 2004
- 21 years old
- Condition
- Fair
- inspected June 2024
- Type
- Culvert
- Steel
- Length
- 30 ft
- 4 main spans
- Daily traffic
- 50
- 2006 count
- Owner
- County
- County Highway Agency
About this bridge
Mingo RD over Mill Branch is a steel culvert carrying Mingo RD over Mill Branch in Colbert County, Alabama. It was built in 2004, so it is 21 years old, younger than the Alabama average of 51.1 years.
The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.
It carries about 50 vehicles a day, projected to reach 75 by 2044. The structure is 30 ft (9.2 m) long. If it were closed, the detour would be 6.2 mi (10 km).
Location
Open in Google MapsCondition and inspection
The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.
| Component | Rating | Meaning |
|---|---|---|
| Channel and channel protection | 7 Good | Some minor problems. |
| Culvert | 6 Satisfactory | Structural elements show some minor deterioration. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Mingo RD over Mill Branch built?
It was built in 2004, making it 21 years old in 2025.
What condition is Mingo RD over Mill Branch in?
The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2024.
How much traffic does Mingo RD over Mill Branch carry?
About 50 vehicles per day (2006 count).
How long is Mingo RD over Mill Branch?
The structure is 30 ft (9.2 m) long with a longest span of 6 ft (1.8 m).
Who owns Mingo RD over Mill Branch?
It is owned by the County Highway Agency.