US Bridges

Cromwell Mill RD over Branch

FairPosted for load

Choctaw County, Alabama · 1.5 MI N Int Rt 187 * 226 · Structure no. 004680

Built
1953
72 years old
Condition
Fair
inspected March 2023
Type
Stringer/Multi-beam or Girder
Wood or Timber
Length
32 ft
2 main spans
Daily traffic
600
1996 count
Owner
County
County Highway Agency

About this bridge

Cromwell Mill RD over Branch is a wood or timber stringer/multi-beam or girder carrying Cromwell Mill RD over Branch in Choctaw County, Alabama. It was built in 1953, so it is 72 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 600 vehicles a day, roughly 10% of them trucks, projected to reach 618 by 2037. The structure is 32 ft (9.8 m) long and 24 ft wide. If it were closed, the detour would be 6.2 mi (10 km).

CarriesCromwell Mill RD
CrossesBranch
Location1.5 MI N Int Rt 187 * 226
RouteCounty Highway 187
StateAlabama
Coordinates32.22622, -88.27378
Functional classRural Minor Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionMarch 2023
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour above top of footing
Structural evaluation2: Basically intolerable, requiring high priority of replacement
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating21.6 US tons
Inventory rating12.1 US tons

Structure

MaterialWood or Timber
DeckConcrete, cast-in-place
Main spans2
Design loadUnknown
Structure length32 ft (9.8 m)
Longest span15 ft (4.6 m)
Deck width24 ft (7.3 m)
Roadway width22 ft (6.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic600 (1996)
Projected traffic618 by 2037
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed6.2 mi (10 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$299,000 (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Cromwell Mill RD over Branch built?

It was built in 1953, making it 72 years old in 2025.

What condition is Cromwell Mill RD over Branch in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in March 2023.

How much traffic does Cromwell Mill RD over Branch carry?

About 600 vehicles per day (1996 count), of which roughly 10% are trucks.

How long is Cromwell Mill RD over Branch?

The structure is 32 ft (9.8 m) long with a longest span of 15 ft (4.6 m) and a deck 24 ft wide.

Who owns Cromwell Mill RD over Branch?

It is owned by the County Highway Agency.