US Bridges

Taylors Chapel RD over Branch

Fair

Calhoun County, Alabama · .1 MI S Ala 202 · Structure no. 001992

Built
1939
86 years old
Condition
Fair
inspected August 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
30 ft
2 main spans
Daily traffic
150
2024 count
Owner
City
City or Municipal Highway Agency

About this bridge

Taylors Chapel RD over Branch is a steel stringer/multi-beam or girder carrying Taylors Chapel RD over Branch in Calhoun County, Alabama. It was built in 1939, so it is 86 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: open, would be posted or closed except for temporary shoring.

It carries about 150 vehicles a day, roughly 1% of them trucks, projected to reach 200 by 2044. The structure is 30 ft (9.1 m) long and 20 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

CarriesTaylors Chapel RD
CrossesBranch
Location.1 MI S Ala 202
RouteCity Street 0
StateAlabama
Coordinates33.60717, -85.9796
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure7 GoodSome minor problems.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, would be posted or closed except for temporary shoring
ScourFoundations stable; scour above top of footing
Structural evaluation2: Basically intolerable, requiring high priority of replacement
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment6: Equal to present minimum criteria
Operating rating5.7 US tons
Inventory rating3.4 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans2
Design loadUnknown
Structure length30 ft (9.1 m)
Longest span15 ft (4.6 m)
Deck width20 ft (6.1 m)
Roadway width18 ft (5.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic150 (2024)
Projected traffic200 by 2044
Trucks1%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$228,000 (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Taylors Chapel RD over Branch built?

It was built in 1939, making it 86 years old in 2025.

What condition is Taylors Chapel RD over Branch in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in August 2024.

How much traffic does Taylors Chapel RD over Branch carry?

About 150 vehicles per day (2024 count), of which roughly 1% are trucks.

How long is Taylors Chapel RD over Branch?

The structure is 30 ft (9.1 m) long with a longest span of 15 ft (4.6 m) and a deck 20 ft wide.

Who owns Taylors Chapel RD over Branch?

It is owned by the City or Municipal Highway Agency.