US Bridges

Al 110 over Slaughters Creek

Fair

Bullock County, Alabama · 2.5 MI E of Co. Rd. 7 · Structure no. 007487

Built
1961
64 years old
Condition
Fair
inspected May 2024
Type
Tee Beam
Concrete
Length
238 ft
7 main spans
Daily traffic
3,400
2013 count
Owner
State
State Highway Agency

About this bridge

Al 110 over Slaughters Creek is a concrete tee beam carrying Al 110 over Slaughters Creek in Bullock County, Alabama. It was built in 1961, so it is 64 years old, older than the Alabama average of 51.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 3,400 vehicles a day, roughly 14% of them trucks, projected to reach 4,726 by 2033. The structure is 238 ft (72.5 m) long and 27 ft wide. If it were closed, the detour would be 19.3 mi (31 km).

Location

Open in Google Maps
CarriesAl 110
CrossesSlaughters Creek
Location2.5 MI E of Co. Rd. 7
RouteState Highway 110
CountyBullock County
StateAlabama
Coordinates32.18814, -85.83319
Functional classRural Minor Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionMay 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating45 US tons
Inventory rating27 US tons

Structure

Structure typeTee Beam
MaterialConcrete
DeckConcrete, cast-in-place
Main spans7
Design loadH 15
Structure length238 ft (72.5 m)
Longest span34 ft (10.4 m)
Deck width27 ft (8.2 m)
Roadway width24 ft (7.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,400 (2013)
Projected traffic4,726 by 2033
Trucks14%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed19.3 mi (31 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$1.6 million (2025 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Al 110 over Slaughters Creek built?

It was built in 1961, making it 64 years old in 2025.

What condition is Al 110 over Slaughters Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in May 2024.

How much traffic does Al 110 over Slaughters Creek carry?

About 3,400 vehicles per day (2013 count), of which roughly 14% are trucks.

How long is Al 110 over Slaughters Creek?

The structure is 238 ft (72.5 m) long with a longest span of 34 ft (10.4 m) and a deck 27 ft wide.

Who owns Al 110 over Slaughters Creek?

It is owned by the State Highway Agency.